DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
General Description
This power unit includes a electrical power up electrical power down circuit with load holding on each A & B ports. A strain compensatred flow handle is usually additional to circuit to manage the decent pace with the cylinder.
Special Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned in advance of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities. N46 hydraulic oil is advised.
4. The energy unit really should be mounted horizontally.
five. Check the oil level while in the tank just after the preliminary working on the energy unit.
six. Oil changing is required after the initial a hundred operation hrs, afterwards the moment each and every 3000 hrs.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
General Description
This power unit has a power up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be provided if required. Also a stress compen sated flow control could be additional to your circuit to control the descent velocity with the cylinder.
Remark: Please seek the advice of our product sales engineer to the various pump displacement, motor electrical power or tank capacity.
Distinctive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned prior to set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities.N46 hydraulic oil is recommended.
4. The electrical power unit needs to be mounted horizontally.
five. Check the oil level in the tank soon after the first running on the electrical power unit.
six. Oil shifting is required right after the preliminary one hundred operation hrs, afterwards once every 3000 hours.